Tianjin Tianyingtai Steel Pipe Co., Ltd. is one of the most credible manufacturers and suppliers of good bearing capacity,adjustable,galvanized scaffolding prop for construction support in China. Welcome to consult the quotation and import cheap good bearing capacity,adjustable,galvanized scaffolding prop for construction support made in China here from our factory.
Welcome to consult the quotation with or to import cheap good bearing capacity,adjustable,galvanized scaffolding prop for construction support, made in Tianjin China from us, which is one of the most credible good bearing capacity,adjustable,galvanized scaffolding prop for construction support, manufacturers and suppliers.
Product Description
In the past, we used a lot of wood to "loquat" to support the template for pouring the roof. Now,
this wooden "loquat" is gradually supported by steel adjustable steel Instead, in foreign countries,
adjustable steel support has been widely used in the construction sector. In China, steel support
for its repeated use, low cost, high security, low-carbon environmental protection of the superior
performance, and gradually replace the wooden pillars, supporting the construction of the top supporting
the template of the main construction tools.
The Composition Of Product
-
1.Inner tube：Various diameter and thickness can be selected according to the bearing capacity.
-
A series of diameter:φ40、φ48和φ60
-
A series of thickness:1.5，1.6, 1.7, 1.8, 2.0, 2.2, 2.35, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75 ,4.0 and so on.
-
The materials mainly use Q235,Q345 can be used in a few situation according to request.
-
2.Outer tube:Various diameter and thickness can be selected according to the bearing capacity.
-
A series of diameter:φ48、φ60、φ76
-
A series of thickness:1.5，1.6, 1.7, 1.8, 2.0, 2.2, 2.35, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75 ,4.0 and so on.
-
The material use Q235.
-
3.Sleeve:Main specification:φ54×3.25，φ60×3.5，φ63.5×3.25，φ76×4
-
4.Nut:double holder nut,the material is Q235,weld two holders,the size of steel pipe is φ70×3.5、
-
φ60×3.5,the length is 125-135mm
-
Name
Legend
Specification
The biggest
bearing capacity
Illustration
G Pin
φ12
5．3Ton
applicated in
Italy prop、
casting single
holder nut prop
φ14
7．2Ton
Applicated in
Italy prop、
casting single
holder nut prop
φ16
9．5Ton
Applicated in
WT>3mm single
holder nut prop
Rope Pin
Applicated in
Thin-wall
single holder
casting nut prop
φ12
5．3Ton
Applicated in
single holder nut
prop
Ring
φ16
11．95Ton
Applicated in
Heavy weight
single holder
（casting nut）
adjustable prop
-
Type
Legend
Specification
Thickness
Square plate
120×120
4．0
4．5
5．0
6．0
X Plate
120*120
4.0
4．5
5．0
6．0
150*150
8．0
Flower Plate
110×110/
120×120
2.5-4.0
The Maintenance Of Product
1. After each use of the product should be cleaned after the clean column outside the surface of the construction waste and mortar, paint the paint column on the part of the paint should be painted, galvanized steel support after use should be coated with anti-rust oil.
2. Steel support should be stored in the open storage, galvanized, hot galvanized products should be
rain and moisture, to avoid contact with corrosive liquids.
3. Steel support into the storage, the upper part of the material shall not be stacked to prevent bending
steel support.
4. Use should avoid throwing throw, so as not to damage the wire head.
5. Silk head nut can be used in the amount of oil can be added.
6. When adjusting with nuts, adjust to the required height at no load, avoid load adjustment, and avoid
nuts when the nut is not rotating.
7. Many times before use should check the nut clearance, such as the gap should be replaced with the
nut in time to prevent tripping.
