Adjustable Scaffolding Prop for Construction,Support Prop

Adjustable Scaffolding Prop for Construction,Support Prop

Building adjustment scaffolding prop is made of two different diameter of the steel pipe set together, welding up and down the plates, prop sleeve.Then combine with the Inner tube,which is punched according to the step distance,then bolt the pin. The scaffolding prop's open lenghth is confirmed by adjusting the position of bolted pin's hole and prop nut.

Send InquiryChat Now
Product Details

Welcome to consult the quotation with or to import cheap adjustable scaffolding prop for construction,support prop made in Tianjin China from us, which is one of the most credible adjustable scaffolding prop for construction,support prop manufacturers and suppliers.

Product Description

Building adjustment scaffolding prop is made of two different diameter of the steel pipe set together, welding

up and down the plates, prop sleeve.Then combine with the Inner tube,which is punched according to the 

step distance,then bolt the pin. The scaffolding prop's open lenghth is confirmed by adjusting the position of

bolted pin's hole and prop nut.

 

 

‍Specifications

Spanish Prop

Adjustable Length Out Tube  Inner Tube Wall Thickness

800-1400mm

48mm 40mm 1.5-2.5mm
1600-3000mm 48mm 40mm
2000-3500mm 48mm 40mm
2200-4000mm 48mm 40mm
Surface Treatment Painted, Power Coated, Electro Galvanized or Hot Dip Galvanized 

 

 

Italian Prop

Adjustable Length Out Tube Inner Tube Wall Thickness
1600-2900mm

56mm

48mm 1.5-2.75mm
1800-3100mm 56mm 48mm
2000-3600mm 56mm 48mm
2200-4000mm 56mm 48mm
Surface Treatment Painted, Power Coated, Electro Galvanized or Hot Dip Galvanized

 

 

Middle East or German Prop

Adjustable Length Out Tube Inner Tube Wall Thickness
1400-2700mm 60.3mm 48.3mm 1.6-4.0mm
1600-2700mm 60.3mm 48.3mm
1620-2640mm 60.3mm 48.3mm
2000-3500mm 60.3mm 48.3mm
2200-3500mm 60.3mm 48.3mm
3000-5500mm 60.3mm 48.3mm
Surface Treatment Painted, Power Coated, Electro Galvanized or Hot Dip Galvanized 

 

 

Packing&Shipping

-01.jpg

Packaging: packed in bundle,suitable sea transport or as your requirement.

Loading Port: Tianjin,China.

 

The Maintenance of Product

1. After each use of the product should be cleaned after the clean column outside the surface of the construction waste and mortar, paint the paint column on the part of the paint should be painted, galvanized steel support after use should be coated with anti-rust oil.
2. Steel support should be stored in the open storage, galvanized, hot galvanized products should be rain and moisture, to avoid contact with corrosive liquids.
3. Steel support into the storage, the upper part of the material shall not be stacked to prevent bending steel support.
4. Use should avoid throwing throw, so as not to damage the wire head.
5. Silk head nut can be used in the amount of oil can be added.
6. When adjusting with nuts, adjust to the required height at no load, avoid load adjustment, and avoid nuts when the nut is not rotating.
7. Many times before use should check the nut clearance, such as the gap should be replaced with the nut in time to prevent tripping.

 

Related Products
Inquiry

Copyright © Tianjin Tianyingtai Steel Pipe Co.Ltd All rights reserved.