The characteristics and analysis of the global regional market operation in August
1. The European market fell slightly
The European flat steel market fell slightly in August. The prices of hot-rolled coil, cold-rolled coil, and plate in EU steel mills all fell, down by US$20, US$5 and US$10 respectively from the end of July. The prices were US$1,335, US$1530 and US$1210. The price of hot-dip galvanized steel was 1565 US dollars. The US dollar was the same as the end of last month (ton price, the same below). The recovery momentum of the European economy continues to slow down. The initial value of the Eurozone manufacturing PMI in August was 61.5, which was lower than expected and previous values. Major auto countries such as Germany, France, and the United Kingdom were affected by the "core shortage", which dragged down the recovery of the European auto manufacturing industry. The initial manufacturing PMI values of Germany and France in August were both lower than the previous month's level. The initial value of German manufacturing PMI was 62.7, which was much lower than the expected 65.0, which was a six-month low. European manufacturing production has basically returned to pre-epidemic levels, and expansion has further slowed down. At the same time, increased corporate cost pressures have inhibited the release of steel demand. India and Russia's low-priced hot coil resources have hit the European market. It is expected that the European flat steel market will continue to adjust in September.
Prices in the European long products market rose slightly. At the end of August, the prices of rebar and wire rods for steel mills in the EU increased by US$20 and US$30 to US$955 and US$1,000 respectively compared with the end of July; the prices of imported rebar in the EU rose by US$18 to US$860, and the import price of wire rods for mesh increased by US$25. To $930. The epidemic prevention and control measures are gradually relaxed. The European Parliament approved the "Updated Connected European Facilities Plan" (CEF) in the early stage, which will increase capital investment in infrastructure construction and boost the demand for construction steel. The European long products market may show signs in September. Strong volatility trend.
2. There is still a certain increase in the North American market
In August, the flat steel market prices in the United States continued to rise. The prices of steel mills in the Midwest rose as a whole, and import prices fluctuated. At the end of August, the price of hot coils in Midwest steel mills in the United States rose by US$105 to US$2,100, cold plate prices rose by US$190 to US$2320, hot-dip galvanized sheet prices rose by US$195 to US$2330, and plate prices rose by US$190. To 1815 US dollars; the prices of imported hot coils and cold plates fell by US$50 and US$15, and the prices of hot-dip galvanized and plate increased by US$40 and 150 respectively. The U.S. economy is recovering quickly, steel demand is strong, and due to its strong external dependence on steel, tight international shipping capacity and rising freight rates have also contributed to the increase in steel prices. The U.S. steel market has experienced independent increases in the past two months. The initial value of the US Markit manufacturing PMI in August was 61.2, which was lower than expected and the previous value. The fastest period of US manufacturing recovery may have passed. The expansion of steel demand is expected to slow down, and the domestic steel capacity utilization rate will rise to a high level. , The employment situation is better than expected, the Fed's monetary policy is shifting to expectations, and flat steel prices may be adjusted at a high level in September.
The price of long products in the United States continues to rise. At the end of August, the price of rebar in the Midwest steel mills in the United States increased by US$5 to US$1050, and the price of imported rebar increased by US$20 to US$1,045; the price of small steel mills in the Midwest increased by US$95 to US$1380, and the price of imported small steel increased by US$50. To $1250. The passage of the infrastructure bill by the U.S. Senate will boost steel demand expectations. The U.S. long section market is expected to remain high and fluctuate in September.
3. The Asian market was mixed
In August, prices in the Asian flat steel market went up and down. Among them, the Chinese market fell slightly. Monitoring data from the Lange Steel Cloud Business Platform showed that at the end of August, China’s domestic plate prices were 6,026 yuan, down 157 yuan from the end of the previous month, or 2.6% month-on-month; Japanese export quotations rose steadily. Hot coil and hot-dip galvanized steel rose by US$5 and US$20, respectively. Cold plate and plate were the same as the end of last month; Indian export quotations fell slightly, and prices of hot-coil, hot-dip galvanized and plate fell by US$10 and US$10 respectively. And 20 dollars. China's economic recovery is slowing down, the expansion of steel market demand is not expected to be strong, and the sharp drop in ore prices has weakened cost support; South Korean automobile manufacturing is affected by chip shortages, production is affected to a certain extent, and steel demand release is subject to certain restrictions; India epidemic Control still hasn't improved significantly, domestic steel demand is sluggish, and local steel mills have to increase their export share. Therefore, it is generally expected that the Asian flat steel market will continue to show a trend of volatility and consolidation in September.
The Asian long products market fell slightly in August. The Chinese market has fallen relatively sharply. Monitoring data from the Lange Steel Cloud Business Platform shows that at the end of August, the domestic long product price in China was RMB 5,402, a decrease of RMB 164 from the end of the previous month, or 2.9% month-on-month; the price of rebar in the Japanese market was higher. At the end of the month, it fell by US$14/ton. September entered the peak demand season. Due to the slowdown in China's real estate and infrastructure investment growth, the demand for construction steel is not strong; India will launch a national infrastructure project of 1.35 trillion yuan to boost market demand expectations. The price strategies of steel companies are divergent. Hyundai Steel of South Korea raised its H-beam sales prices in September, while Kyoei Steel of Japan announced that in order to prevent a decline in the distribution market, the sales prices of rebar in September remained unchanged. It is expected that the Asian long products market will be in September. It will show a strong turbulence.
2. The international steel market will adjust sideways in September
The global economic recovery has slowed down, and the manufacturing PMI of major economies continues to fall. The initial value of the Markit manufacturing PMI in the euro zone in August fell from the previous month, and the momentum of economic recovery has weakened; the initial value of the Markit manufacturing PMI in the United States in August was lower than expected and last month, the economy may recover or enter the top area; made in China in August The industry PMI continued to fall, and the momentum of economic recovery was significantly weakened. After the epidemic, the global economy has experienced a bottom rebound and accelerated recovery. It is currently entering the top region. Demand for bulk commodities is also approaching a high point. The supply and demand of the steel market has generally improved. There are certain differences between regions. The market is diverging. The North American market prices continue to rise. The European market fell behind last month's high and continued to fall slightly in August, while the Asian market remained volatile, with prices fluctuating.
Regarding the later trend of the international steel market, the Lange Steel Research Center believes that the global economic recovery is becoming more and more obvious, the expansion of commodity demand is gradually weakening, and the demand for steel is expected to peak soon. From the perspective of supply, global crude steel production in July increased by 3.3% year-on-year, and regions outside of China increased significantly year-on-year. Compared with the same period in 2019, there was also a certain increase. The tight supply and demand of overseas steel market will gradually ease. At the same time, Powell said at the recent global central bank meeting that the Fed may begin to reduce the monthly bond purchases later this year, but it will not rush to raise interest rates. The price increase in the international steel market is expected to come to an end, and the adjustment is only a matter of time. Due to the relatively strong demand and the price decline or relatively easing, the international steel market is expected to show a sideways adjustment trend in September.






